SGR1100 - Students At Risk for Promotion

Grade Reporting > Reports > Grade Reporting Reports > Student Verification > SGR1100 - Students At Risk for Promotion

The report lists students who are at risk of not being promoted to the next grade level. Early identification of these students allows campus employees to schedule students for an extended year or other special programs.

The report summary provides a student's demographic information and reason(s) for being listed on the report.

The detailed report provides specific information about the reason the student is at risk.

Below are the reasons considered when determining if a student is at risk for promotion:

Failed Course - The student is failing one or more graded courses. The course section and failing grade is displayed on the detailed report

Failed STAAR 3-8 or STAAR EOC - The student failed a STAAR 3-8 or STAAR EOC test in the current school year.

The administration date and test type for which the student did not meet the minimum expectations is displayed on the detailed report.

The report does not consider a student's TAKS test results.

Course Absences - The student's number of absences in a course section either meets or exceeds the number entered in the Number of Course Days Excessive parameter. The detailed report displays the number of absences for each course section for the semester in which the report was run.

ADA Absences - The student has excessive ADA period absences, which can lead to the student failing to attend school for the minimum required attendance days. The detailed report displays the number of absences for each course section for the semester in which the report was run.

Less than Minimum Credit - The student has not earned sufficient course credits for the specified semester(s).The detailed report displays the student's total credits earned for all graded courses in the semester for which the report is run.

Note: If a student is at risk for promotion because of a failed course and does not have a semester or final grade for a course, the Sem and Fin fields are blank.

Run the report:

Parameter	Description
Ending School Year (YYYY)	Type the four-digit ending school year.
Campus IDs (Blank for All)	Type the three-digit campus IDs, separating multiple campus IDs with a comma. Or click to select the campuses. Leave blank to select all campuses in the district.
Grade Levels (Blank for All)	Type the two-character grade levels, separating multiple grade levels with a comma. Or, click to select the grade levels. Leave blank to select all grade levels.

Semester (1, 2, 3, 4)	Type the one-digit semester. Valid semesters are 1 and 2. For a four-semester campus, valid semesters are 1, 2, 3, and 4.
Cycle (1, 2, 3)	Type the one-digit cycle code.
Type of Grade (C=Cycle, S=Semester, F=Final)	C - Run the report for cycle grades. S - Run the report for semester grades. F - Run the report for final grades.
Rpt Type (B=Blnk, I=Incmplt, F=Failing, N=N/G, C=B&I&N, A=All)	B - Select blank grades. I - Select incomplete grades. F - Select failing grades. N - Select N/G (no grade) grades. C - Select blank, incomplete, and N/G grades. A - Select all (blank, incomplete, failing, and N/G grades). If set to F or A/,an ampersand (&) is displayed next to courses with a failing grade if the student was not enrolled in the course-section during the semester-cycle for which the report was run. This includes failing grades for students who changed course-sections, bringing the course grade to the new section when the original course section does not meet the criteria for the report.
Sort Order (S=Student, I=Instructor)	S - Sort by student. I - Sort by instructor.
Include Self Paced Courses (Y, N)	Y - Include self-paced courses. N - Do not include self-paced courses.
Include Withdrawn Students (Y, N)	Y - Include students who have a withdrawal date before the end date of the specified semester-cycle. Withdrawn students are indicated with an asterisk. N - Exclude students who have a withdrawal date before the end date of the specified semester-cycle. Example: If a student has a withdrawal date in cycle 3, the report is run for cycle 1, and the student has a grade for cycle 1, the student is included. If the report is run for cycle 3, the student is not included. This setting overrides the Check Student Entry/WD Dates for Blank Grades (Y, N) parameter.
Include Withdrawn Courses (Y, N)	Y - Include courses with a withdrawal date before the end date of the specified semester-cycle. N - Exclude courses that have a withdrawal date before the end date of the specified semester-cycle. A course is not considered withdrawn and is included on the report if the course withdrawal date is after the track end date for the semester-cycle for which the report is run.
Attendance Track (Blank for All)	Type the two-digit attendance track. Leave blank to select all tracks.
Check Student Entry/WD Dates for Blank Grades (Y, N)	Y or blank - Include students who were not withdrawn from a course as of the grade reporting cycle end date of the specified semester-cycle, but were enrolled at the campus during the semester-cycle for which the report was run. N - Include students who were not withdrawn from a course as of the grade reporting cycle end date of the specified semester-cycle, whether or not the student was enrolled at the campus during the semester-cycle for which the report was run. The Include Withdrawn Students parameter overrides this setting.
Print Only Transfer Courses (Y, N)	Y - Print only the student's transfer courses. N or blank - Exclude the student's transfer courses. NOTE: Some report types (i.e., Rpt Type parameter = I, F, N, C, or A) will include transfer courses even if this parameter is set to N or blank.)

Other functions and features:

Sort

Sort report data.

You can sort data to make it easier to review or find records in the reports. Not all reports allow this option.

In the report window, click Sort/Filter to open the Sort/Filter window. By default, the Sort Criteria section is expanded. If not, click Sort Criteria.

(Left grid) Columns Available for Sorting	Click the field by which you want to sort, and then click . The field moves to the right grid. Continue moving fields to the right grid as needed.
(Right grid) Sort Columns	You can rearrange the fields to indicate the order in which you want the sort applied. Click a field name, and drag it up or down to a new location. • In the right grid, for each field, indicate if you want that data sorted in ascending (e.g., A-Z, 0-9) or descending (e.g., Z-A, 9-0) order. • To remove a field from the sort, select the field, and then click to move it back to the left grid.

Select the Sort Criteria check box and click OK to apply the selected sort criteria to the report.

Click Cancel to close the window without re-sorting.

Filter

Filter report data.

Filter

When you want to view only certain data, you may find it useful to filter the report data. You can use specific criteria to retrieve only the data that you want. Not all reports allow this option.

From the report window, click Sort/Filter to open the Sort/Filter window. By default, the Sort Criteria section is expanded. Click Filter Criteria to expand the Filter Criteria section.

If the report does not allow sorting, the Filter button is displayed instead of the Sort/Filter button, and sort criterion fields are not available.

Click Add Criterion to add new filter criteria. A blank row is added to the grid.

Column	Select a field by which to filter the data. The drop down lists the columns that appear on the report.
Operator	Select an operator. = Equals ≠ Not equals › Greater than ≥ Greater than or equal to ‹ Less than ≤ Less than or equal to
Value	Type the value by which you want to filter. For example, if you selected a date in the Column field, type a date to view only data for a specific date. Note: When filtering report data by date, you must use the following formats: • If the date is displayed in the MM/DD/YYYY format, the filter value must be in the YYYYMMDD format. • If the date is displayed in the MM/YYYY format, the filter value must be in the YYYYMM format. • If the date is displayed in the MM/YY format, the filter value must be in the YYMM format.

Add Criterion

Add another row.

Delete Selected

Delete selected row.

Click OK to apply the selected filter criteria to the report.

Click Cancel to close the dialog box without applying a filter.

NOTE: Some applications allow you to filter by specific data:

In Test Scores, you can filter report data to include only students who are enrolled in special programs. When filtering report data for At Risk, PRS, and GT programs, you must select 1 (Yes) or 0 (No) in the Value field. For example, if you filter report data for the At Risk program by selecting Equals in the Operator field and Yes in the Value field, no data is displayed; however, if you select 1 in the Value field, the At Risk data is displayed.

Reset

Reset report data.

Student

Sidebar

Table of Contents