Manage Rubric Charts

Settings > Manage Rubric Charts

This page allows you to create rubric charts that can be used for grading assignments. A rubric chart is a set of criteria (i.e., skills) used for assessing a student's work or performance and includes levels of potential achievement (i.e., scores) for each criterion.

Once a rubric is created, you can associate the rubric chart with an assignment on Settings > Manage Assignments. Then, the rubric will be available for the assignment on Grades > Assignment Grades.



Set Up Rubrics page

Create a rubric chart:

Your existing rubric charts (i.e., rubric charts created by you) are listed. Otherwise, the message “No rubrics found” is displayed.

Add a rubric chart:

In the field next to the Add Rubric button, type a unique name for the new rubric chart, then click Add Rubric.

Add Rubric

The new rubric chart is added to the Available Rubrics list.

Available Rubrics

Click Spyglass for the new rubric chart.

Edit Rubric Chart

The rubric opens on the right side under Editing Rubric: {Rubric Name}, where {Rubric Name} is the name you entered.


❏ Under Editing Rubric: {Rubric Name}:

A grid is displayed allowing you to enter criteria (i.e., skills) and scores for each criterion.


❏ Add Skills:

To add skills to the rubric chart, type the first skill name, up to 50 characters, and click Add Skill. The skill is added to the grid, and a blank field is displayed allowing you to add another skill.

Add skill

Continue adding skills as needed.

Skills added



❏ Add Scores:

Each rubric chart must have at least one column under Scores.

Establish a set of score names. For example, you could create the following set of five score names: Not Attempted, Below Average, Average, Above Average, and Exceeds Expectations.

To add a score, type the first score name (e.g., Not Attempted), up to 50 characters, and then click Add Score. The score is added to the grid, and a blank field is displayed allowing you to add another score.

Add Score

Continue adding scores as needed.

Scores added

❏ Enter Low/High Points:

For each score, use the Low Points and High Points fields to establish a range of possible points within each score. Or, you can assign a single point value for each score.

The fields can have up to three digits.

Points Added


Example 1 (with score ranges):

Within each score, you can establish a range of possible points:

The Not Attempted score may have Low Points and High Points both set to 0, because 0 points would be awarded if the student did not attempt the skill.

The Below Average score may have Low Points set to 1, and High Points set to 10, so a student who performed below average on the skill can earn between 1 and 10 points.

The Average score may have Low Points set to 11, and High Points set to 20, so a student who had average performance on the skill can earn between 11 and 20 points.

The Above Average score may have Low Points set to 21, and High Points set to 30, so a student who had above average performance on the skill can earn between 21 and 30 points. The highest score a student could receive would be 30.

The Exceeds Expectations score may have Low Points set to 31, and High Points set to 40, so a student who had above average performance on the skill can earn between 31 and 40 points. The highest score a student could receive would be 40.

In this example, if 10 skills were scored, the student could earn a maximum of 400 points for the assignment.


Example 2 (without score ranges):

To assign a specific number of points to each score, type the number of possible points in the Low Points field and leave the High Points field blank. When you save, the High Points field will automatically be set to the value in the Low Points field.

The Not Attempted score may have Low Points set to 0, because 0 points would be awarded if the student did not attempt the skill. Leave High Points set to 0 or blank.

The Below Average score may have Low Points set to 1, because 1 point would be awarded if the student had below average performance for the skill. Leave High Points set to 0 or blank.

The Average score may have Low Points set to 2, because 2 points would be awarded if the student had average performance for the skill. Leave High Points set to 0 or blank.

The Above Average score may have Low Points set to 3, because 3 points would be awarded if the student had above average performance for the skill. Leave High Points set to 0 or blank. The highest score a student could receive would be 3.

The Exceeds Expectations score may have Low Points set to 4, because 4 points would be awarded if the student had above average performance for the skill. Leave High Points set to 0 or blank. The highest score a student could receive would be 4.

In this example, if 10 skills were scored, the student could earn a maximum of 40 points for the assignment.




❏ Enter a score note:

(Optional) For each skill, type a note about the score as it relates to the specific skill, up to 255 characters. The note is used to further clarify the requirements for awarding points for the skill.

Notes added

See Notes on Special Characters and Copy/Paste From Other Documents.

TIP: You can expand the size of the fields by dragging the bottom-right corner of the field to the desired size. When you save the note, the field will return to its original size.

Expand notes




Scores must be entered in ascending order from left to right.

Scores cannot be out of sequence; however gaps can exist.



❏ Click Save.

Total Points

The highest possible number of points a student can earn for this assignment is calculated and displayed in the bottom-right corner. The number changes every time you save changes that affect the total possible points for the rubric chart.

Total Points



❏ To save a copy of the displayed rubric chart with another name (e.g., to use the rubric chart as a template for another rubric chart), type the new name in the field next to the Save As button, then click Save As.

Save As

The new rubric chart is added to the Available Rubrics list. The new rubric chart can be modified as needed.



Edit a rubric chart:

❏ Under Available Rubrics (left), click Spyglass for the rubric chart you want to change.

The rubric chart opens under Editing Rubric (right). Modify the chart as needed, and then click Save.


NOTE:
If you attempt to edit a rubric chart that is in use, a message is displayed indicating the number of assignments using the rubric chart; however, you are not prevented from modifying some parts of the rubric chart:

  • The skills cannot be changed.
  • You cannot add a skill; the Add Skill button is not displayed.
  • You must keep at least one column under Scores.
  • The score note field can be modified.
  • You can add scores, but you must maintain the same Total Points.



Delete a rubric chart:

❏ Under Available Rubrics (left), click Delete to delete an existing rubric chart.

❏ You are prompted to confirm that you want to delete the rubric chart. Click OK.

NOTE: You cannot delete a rubric chart that is in use (i.e., associated with any assignment).

Print the rubric chart:

❏ Click Print to print a report of the displayed rubric chart.

Print button

The Rubric Report Selection page opens allowing you to make selections for printing the report.

This report prints a rubric chart which has been set up on Settings > Manage Rubric Charts. You can print only the rubric chart (i.e., blank), or you can print the rubric chart with student grades for a particular assignment.



Rubric Report Selection page

❏ Specify report options:

Rubric NameSelect the rubric chart you want to print. Only rubric charts that have skills and scores already set up are listed.
Title(Optional) Type a title for the report, up to 50 characters. If blank, the rubric chart name is used as the title.
Print with grades

Select to print the report with student grades. This field is only displayed if the selected rubric chart has already been used to grade an assignment.

If selected, an additional field is displayed allowing you to select a course-section. Only course-sections that have a rubric chart set up are listed.

course-section

Once you select a course-section, another field is displayed allowing you to select the assignment that was graded with a rubric chart.

assignment

Once you select an assignment, a list of students in the course-section is displayed, along with their grade for the assignment.

This Student

Select for the students you want to print the rubric for. You can select Check all at the top of the column to select all students in the course-section.


❏ Click Generate.

  • The report opens in a new window, and you can print the report from that window.
  • The report selection page remains open on your desktop.