This utility creates next year district courses (i.e., the district master schedule) from current year district courses in Grade Reporting. Once created, the courses can be modified as needed on Scheduling > Maintenance > Master Schedule > District > Courses.
If next year master schedule information already exists, the utility is disabled, and the following message is displayed: “The Next Year Master Schedule Information already exists. You will NOT be able to run this utility to create courses.”
District Courses |
The field is automatically selected, indicating that the district courses will be created. |
---|
NOTE: If the Maximum Course Number Length in Scheduling (Maintenance > Master Schedule > District > District Control) is different than the current year Maximum Course Number Length in Grade Reporting (Maintenance > Tables > District Control Table), the courses are created using the crosswalk table that was created in Scheduling when the New Course Number Length was changed to match the new district master schedule on the District Control tab.
After the new course number length has been committed, the crosswalk table will no longer exist, and the courses in current year Grade Reporting will be zero padded to the correct length for next year based on the options selected on the Scheduling District Control tab.
❏ Click Create.
❏ You are prompted to confirm that you want to create the courses. Click Yes.
❏ If errors are encountered, click Show Errors to view the error report.
Review, save, or print the report.
Review the report using the following buttons:
Click to go to the first page of the report.
Click to go back one page.
Click to go forward one page.
Click to go to the last page of the report.
The report can be viewed and saved in various file formats.
Click to save and print the report in PDF format.
Click to save and print the report in CSV format. (This option is not available for all reports.) When a report is exported to the CSV format, the report headers may not be included.
Click to close the report window. Some reports may have a Close Report, Exit, or Cancel button instead.
Once created, courses can be modified as needed on Scheduling > Maintenance > Master Schedule > District > Courses.
search drop-down |
Select the field by which you want to search for courses. |
---|---|
search |
Type all or part of the search phrase. |
❏ Click Retrieve.
A list of courses that meet the specified criteria is displayed.
Course records are only retrieved if the Grade Reporting current year master schedule was copied to Scheduling.
You can re-sort the grid by clicking on an underlined column heading. It will sort in ascending order. Click it again to sort in descending order.
A triangle next to the column heading indicates the column by which the grid is currently sorted and whether it is sorted in ascending or descending order.
Change the grid view:
The default view in the grid is basic course information indicated by ⇒ Crs Nbr in the area below the grid. You can modify the view in the grid by clicking an underlined header in that area.
For example, if you click the Scheduling header, only restrictions information is displayed in the grid. The Scheduling header is displayed as ⇒ Scheduling indicating that it is the current view.
❏ The following fields are displayed below the grid where you can add or update the record:
Crs Nbr |
Type the four- to eight-digit course number assigned to the course by the district. NOTE: If you have selected to change the course number length on Maintenance > Master Schedule > District > District Control, a crosswalk is created and the New Course Number field displays the new zero padded course number next to the old course number. |
---|---|
title |
Next to the Crs Nbr field, type the name of the course, up to 15 characters, with no commas. |
Abbrev Name |
Type the eight-character abbreviated course name that will print on the AAR (SGR2047). The field is for local courses only. |
Service ID |
(Required) Click to select the service ID for the course. NOTE: Local Service IDs that begin with 8 must be unique and cannot end in XXX. |
Graded Crs |
Select if the course is graded. |
Nbr Sem |
Select the number of semesters of the course. |
Textbook ISBN |
Type the international standard book number (ISBN) associated with the textbook for the course, up to ten characters. |
Exclude from TeacherPortal |
Indicate if the course should be excluded from the Attendance and/or Grades pages in TeacherPortal. |
Self Paced |
Select if the course is self paced. Self-paced courses can only be one semester long. |
❏ Under Scheduling:
Per Ctrl |
Type the period control number for the course, which is the number of class periods per day the course meets multiplied by the number of semesters taught. |
---|---|
Department |
(Optional) Type the code indicating the academic department with which the course is associated, up to three characters. The code is determined by the district. |
Gender Restr |
Select a gender if the section is restricted to one gender. |
Required Elective |
Indicate if the course is a required or elective course. NOTE: When the grid view is set to ⇒ Scheduling, the selected option is displayed in the Course Priority column in the grid. |
Other Categ |
(Optional) Select an additional subject category for which the course will be listed in ASCENDER StudentPortal. This category is in addition to the service ID. |
❏ Under Course Codes and Credits:
Tot Credits |
Type the number of academic credits awarded to students who pass the course, up to two digits. The decimal is inserted automatically. For example, if you type 10, the field displays 1.0. |
---|---|
Credit Seq |
Select the code indicating the conditions under which credits are awarded. |
Part Credit |
Select if partial credit is awarded to students who fail one or more semesters or are only enrolled in part of the course. Partial credit is not allowed for regular one-semester and self-paced courses. |
Credit Lvl |
Select the code indicating the campus level at which the course credit is awarded. |
AAR |
Select the code indicating the academic area in which the course is a requirement. This code determines where the course is displayed on the AAR Multi-Year (SGR2047) report. |
CPR |
Select if the course allows a student to meet the requirement for cardiopulmonary resuscitation (CPR) instruction. The CPR instruction must include training that has been developed by the American Heart Association or the American Red Cross, or using nationally recognized, evidence-based guidelines and incorporation psychomotor skills to support the instruction. |
Grad Plan |
Select the subject area to which the course should be applied on a graduation plan, if other than the course's service ID type. |
Speech |
Select if the course allows a student to meet the Foundation High School Program (FHSP) requirement for speech skills. |
Spec Cons |
Select up to two codes indicating special considerations for the course. The codes cannot be the same for both fields. Special considerations are printed on the student's AAR (SGR2047). |
OnRamps |
Select if this course is an OnRamps dual enrollment course coordinated by The University of Texas at Austin. The field can only be selected for high school credit courses (i.e., Credit Lvl = H). |
❏ Under Elem/Misc:
Core Crs |
Select the code indicating the core course type. |
---|---|
ELA Wgt |
(English Language Arts weight) Type the percentage of the total language arts grade that the grade for the course represents. NOTE: If this field is blank or non-numeric, it will be calculated as 0. |
Auto Grd |
Type the default grade that should be assigned to students who have no grade recorded for the course, up to three characters. The field can be alpha or numeric. |
Incl UIL Elig |
Select if the course is used in determining six-week eligibility for extracurricular activities. University Interscholastic League (UIL) rules allow some courses to be exempt in determining six-week eligibility.
This field exists on the campus section record (Maintenance > Master Schedule > Campus > Sections) as well as the district course record (Maintenance > Master Schedule > District > Courses). Both fields affect the Student Grades (UIL Eligibility) Report in TeacherPortal. |
Exam/Sem Pat |
Select the code indicating when exam and semester grades are given. |
❏ Under PEIMS:
CTE Hrs |
Type the number of Career and Technical Education (CTE) hours associated with the course (1-6). The hours are used by the Attendance application to compute CTE contact hours. Leave blank if this is not a CTE course. |
---|---|
Pop Srvd |
Select the code indicating the student population primarily targeted for the section. |
Instr Sett |
Click to select the instructional setting used when providing instruction to the students in the section. |
Class Type |
Select the code indicating if the section class type is regular or non-regular. |
Role ID |
Select the code indicating the capacity in which the instructor serves the students during the section. |
Crs Seq |
Select the code indicating the sequence of the course, which is not necessarily the semester in which the course is taught. |
❏ Under HR/GA (Honor Roll/Grade Averaging):
HRoll Wgt |
Type the number of times the course is counted in honor roll computation. Type 0 to exclude the course from honor roll computation. |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
HRoll Table |
Select the code indicating the table used to convert the student's course grade in honor roll computations. |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||
HRoll Code |
Select the code indicating if this course's grades or students should be excluded from honor roll computations. |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||
GA Table |
Select the course type table which will be used to adjust the student’s grade for the course in grade averaging calculations. These course types are set up on Grade Reporting > Maintenance > Tables > Course Type.
NOTE: The default value for a course is R-Regular when added to the district master schedule. If R is not the correct grade average table for the course, the field must be updated. |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||
GA Wgt |
Type the number of times the grade for the course is counted in grade averaging calculations.
NOTE: The weight can be used to exclude a course from grade averaging. If a course has zero weight, it is excluded. Many campuses exclude PE, Band, Athletics, Office Aide, etc. from grade averaging calculations. |
❏ Click Save.
Edit a record.
The data is displayed in fields below the grid allowing you to make changes.
|
|
Delete a course record.
1. Click to delete a row. The row is shaded red to indicate that it will be deleted when the record is saved. You can select multiple rows to be deleted at the same time. You can save edits and delete records in the same step (i.e., the changes are all committed when the record is saved). Courses cannot be deleted if they are selected by a campus, have section records, or are a part of a graduation plan that has students assigned to it. |
The Texas Computer Cooperative (TCC) is committed to making its websites accessible to all users. It is TCC policy to ensure that new and updated content complies with Web Content Accessibility Guidelines (WCAG) 2.0 Level AA. We welcome comments and suggestions to improve the accessibility of our websites. If the format of any material on our website interferes with your ability to access the information, use this form to leave a comment about the accessibility of our website.